MeterShop

EDMI MK10A Three Phase Direct Connect Smart Meter

The EDMI MK10A Three Phase WC Meter is an advanced AMR-capable, pattern approved, three phase electricity meter.

Price includes standard programming. Price without programming or special templates available on request.

Description

The EDMI MK10A Direct Connect Meter is an advanced three phase, 3 element, 4 quadrant electronic meter which is AMI ready. The EDMI MK10A Direct Connect Meter is:

  • National Measurement Institute pattern approved for use in billing and trade applications
  • Class 1,2 accuracy
  • Suitable for a wide range of measurement applications both residential and commercial
  • Remote read capability, reducing the need for utility visits by meter readers and increasing site security (requires modem and additional data services)
  • Whole Current/direct connect 10(100A) – Also available in CT (5(20A)) configuration
  • Programmable template configuration available (additional costs apply)
  • Now Available with 3 Active Inputs

Download the fact sheet here: EDMI Mk10A Three Phase (WC) Electricity Meter

Additional Information

Metering Dynamics supplies the following build codes through MeterShop:

  • 1A11-J21-27-F11-201030-3P = 10/100A WC/Direct Connect - (1 Active Input, 3 S0 Outputs)
  • 1A11-H21-27-F11-201030-3P = 5/20A CT - (1 Active Input, 3 S0 Outputs)
  • 1A11-J21-27-F11-203010-3P = 10/100A WC/Direct Connect - (3 Active Inputs, 1 S0 Output)
  • 1A11-H21-27-F11-203010-3P = 5/20A CT - (3 Active Inputs, 1 S0 Output)

Features of electricity meters from EDMI (Atlas series) include:

  • national measurements pattern-approved
  • class 1, 2 accuracy (1% active, 2% reactive)
  • suitable for 3 phase, 4 wire applications
  • three element
  • measures billing log – import/export Wh, varh. engineering log – current average, voltage average, and phase angle for each phase (13 channels split between two logs)
  • one RS 232 serial communication port for modem connection
  • option to use SmartHub MODBUS interface with Building Management Systems (BMS)
  • option to use EDMI Mini-Hub interface for connection to RS485 networks (EDMI Command Line)
  • sub-metering interval – 30 minutes (Queensland), 15 minutes (outside Queensland)
  • over 5 years of 4 channel, 30 minute interval data can be held in memory
  • ability to store average/minimum/maximum values for interval duration.

Technical Details

Nominal voltage 220-240V
Operating voltage 180-290V
Frequency 45-65Hz
CT current range 5(20)A
WC current range 10(100)A
Operating temperature range -25°C and +60°C
Storage temperature range -40°C and +80°C
Relative humidity Up to 95% non-condensing
Approvals IEC 62052-11, 62053-21, 62053-23
Dimensions 240mm(H) 165mm(W) 80mm (D)